Most honda vehicles starting from 1996+ have a stock immobilizier. A part of this immobilizier is located in the ECU which will make it difficult to change the ECU. (i.e. for replacement with a Chipped ECU, replacement for Repair, temorary replacement for trouble shooting, etc ...)

To solve this problem, replace the immbolizier-board of the ECU with our Mobilizier Modul. With this the ECU will accept every Key with transponder (as long as the immobilizer unit under the dash sees the transponder, too).

If you want to use a key without transponder, you need to bypass the Immobilizier unit under the dash, too. This is easily done by shorting a relay.

At the moment we can only offer a version for the IMMO-A0. (refer the footprint on the PCB of the ECU).