Doctronic - smart solutions - ProECU-K for CL7/CL9

Here is our (almost) Plug-N-Play Solution for the Honda Accords CL7/Euro-R and CL9.

     Because in this cars the electronic controls some functions via a comfort-CAN-Bus, the
     integration of a programmable ECU gets complicated.
     We developed a Dual-ECU-Harness, where the stock ECU stays in place to control the
     gauge cluster, air condition and in the CL9 the Drive-by-Wire. Additional a ProECU-K will
     be connected to control the Engine.

     The secondary O2 Sensor will become the primary, because the stock Accord primary
     O2 Sensor is not compatible with the ProECU-K. To make the installation easier, we
     offer extension harnesses for the O2 Sensor.

     The Check-Engine-Light is controlled from the stock Accord ECU via CAN-Bus, so we
     added a MIL Light Sub-Harness with a yellow LED. It can be installed additional or you
     can blank out the stock MIL Light and install the new MIL in the place.

     • (almost) Plug-n-Play, only O2 Sensor and MIL-Light needs to be altered
     • Air Condition & Gauge Cluster works
     • All functions of ProECU-K
     • Edit Fuel, Ignition Tables
     • Expanded Tables for Boost (20x20 Cells)
     • VTEC Control incl. full VTEC Window
     • Idle Control (only CL7, EURO-R)
     • Rev Limiters, Fuel and Ignition Cut
     • Shiftlight by Gear
     • Launch Control (2 Step) by Ignition Cut
     • Flatshift (3 Step) by Igniton Cut
     • Flatshift by Gear
     • Lambda Control
     • Boost Control by Gear
     • Nitrous Control
     • and much more …

     See our ProECU-K page for all the features.

     * The functions of the VSA and cruise control may be disturbed.

     ProECU-K for Accord CL7/CL9, Euro-R contains:

     • (used) K-Series ECU, special modified for use with the Dual-ECU-Harness
        or as "Send-In", you send us a compatible ECU (PRA, PRB-A01..A09, ...)
     • Dual ECU Harness with MIL-Lamp
     • USB Cable
     • Softwarelicense for the Tuningpackage
     • (Software as Download from our Server)

     System Requirements for the PC Software:

     Windows XP, Vista, 7, 8.1, 10, 11
     CPU 1 GHz+
     Ram 1 GB+
     Harddrive 10MB+ free
     USB 2.0 Port
     Screen Resolution 1440x900 or higher recommended

Product	Available	Price (EUR)	Quantity
ProECU-K for CL7/Euro R incl. ECU	(low stock)	1099.00
ProECU-K for CL9 incl. ECU	(low stock)	1099.00
ProECU-K for CL7/Euro R incl. ECU, Budget Version	(low stock)	1050.00
ProECU-K for CL9 incl. ECU, Budget Version	(low stock)	1050.00
ProECU-K for CL7/Euro R, Send-In	(in Stock)	899.00
ProECU-K for CL9, Send-In	(in Stock)	899.00
O2 Extension Harness 4 Pin	(in Stock)	20.00
O2 Sensor Extension Harness 6 Pin	(in Stock)	20.00
		excl. VAT